ISO Ceramic Lagging Sheet High Abrasion Resistance Ceramic Pulley Lagging

​Product Description

Ceramic pulley lagging is a kind of drum encapsulation. The ceramic pulley lagging uses advanced thermal vulcanization technology to vulcanize wear-resistant ceramic blocks with particles on the surface in a special rubber according to a certain layout. Under the pressure of the general conveyor belt, Thousands of unique cast bumps can generate positive traction, prevent slippage, and extend the service life of the conveyor belt roller. At the same time, the elasticity of the bottom rubber can play a very good impact resistance. Each ceramic rubber sheet has grooves spaced at a certain distance. With a unique self-cleaning function, the ceramic pulley lagging is particularly suitable for humid working environments.

Product advantages

1. The high abrasion resistance of the surface ceramics is used on the belt drive drum. The special structure of the ceramics and the special arrangement method increase the friction coefficient between the belt and the belt to prevent the belt from slipping.

2. Under the same load, the tension of the belt can be reduced and the life of the belt can be prolonged.

3. The wear resistance of ceramics makes the service life of the driving drum more than ten times longer than that of the original drum.

4. It is suitable for extremely harsh conditions such as high abrasion, easy skidding and wet materials or surrounding environment.

​Scope of application

1. The belt speed is within 4.5m/s;

2. The belt joint is not suitable for iron buckle fixing;

3. The temperature of the material conveyed by the belt is within 80℃;

4. It is suitable for the transportation of wet and viscous materials, and it is suitable for driving rollers or reversing rollers where the belt conveyor is often slippery and the surface is not wear-resistant.

​Common specifications

The thickness of the ceramic lagging roller is 12mm, 15mm, 16mm, and 20mm, and the length is 1200mm, 1400mm, 1600mm, 1800mm, 2000mm, etc. It can also be customized according to the customer's size. The width of the ceramic rubber sheet is 500mm, which can be installed on-site. The roller does not need Disassembly and assembly is convenient and fast, and can also be processed by custom parts. It is suitable for rollers of various specifications and roller rubber sheets in extremely harsh working environments. The size of the ceramic sheet is 20*20*8, with a green wear-resistant layer.

​Precautions for roller encapsulation

1. The temperature should be higher than 10℃, the relative humidity should be less than 90%, no water should be allowed, the site should be relatively dust-free, and measures such as windshield on the downwind side and an awning can be taken;

2. Grinding and polishing should be thorough, and no glue residue, rust spots, pits, and flashes should be left;

3. Brush metal primer or metal treatment agent should be even, dry, and not dry, apply hot air blowing and drying measures;

4. Brush the glue twice, evenly, and one-way brush from one direction to the other to avoid air bubbles causing failure of the encapsulation. Each brushing must wait for it to dry before the second brushing. After the second brushing, it must be brushed. Wait for it to dry before encapsulating it;

5. Rolling and beating should be from the middle to both sides when encapsulating, so as not to generate bubbles and cause the encapsulation to fail;

6. Sealing, the size should be calculated, and there should be no gaps and bulging bubbles;

7. It is best to cure for 8 to 24 hours after encapsulation, the best use effect.​