DN80 95% Alumina Ceramic Ring Lined Elbows for Germany

ELACERA supplied two DN80 ceramic ring-lined elbows with 95% alumina ceramic lining for a customer in Germany. The elbows featured a 90° bend, an R500 radius, and loose flange connections.

The customer's order, placed in December 2021, included a drawing reference, the bend geometry, and the flange arrangement. These details defined the configuration for this two-piece supply.

Supply Details

Matching the Ceramic Lining to the Complete Elbow

For a ceramic ring-lined elbow, material selection and dimensional matching need to be reviewed together. The ceramic forms the internal wear-contact surface, while the steel shell provides the outer structure and supports the connections.

The drawing review should cover the finished bore, ceramic thickness, transitions between ceramic sections, and lining termination at both ends. The flange dimensions and the mating pipeline also need to be checked together.

For a replacement enquiry, these details help establish whether the proposed elbow will fit the available installation space and connect correctly to the adjoining pipework.

From Finished Elbows to Export Packing

The pre-packing photographs show the two finished elbows with grey-white exterior surfaces and protective covers secured over the openings. Both curved assemblies and their flange connections are visible before wrapping.

The packing photographs then show the elbows individually wrapped and placed side by side inside a wooden case. The wrapping covers the curved bodies and end connections.

The case exterior carried handling marks for upright positioning, keeping dry and fragile cargo. Together, the photographs record the products before packing, their arrangement inside the case, and the closed case before dispatch.

When planning a similar shipment, the complete assembly weight, projecting connections, support and restraint all deserve attention alongside surface protection.

Enquiries for Similar Ceramic Ring Lined Elbows

For a similar requirement, send ELACERA the drawing, required finished bore, ceramic thickness, bend angle and radius, and flange details.

Please also include the conveyed material, operating temperature, pressure, and any available photographs of existing wear. This information helps us review the lining structure and connection requirements for the intended application.