The installation process of alumina ceramic tube is mainly divided into three steps: porcelain ring splicing, porcelain ring pasting and grinding.
Porcelain ring splicing: Porcelain rings are spliced with glue according to the requirements of the drawings to ensure that the interior is flat.
Porcelain ring paste: apply the adjusted adhesive on the inner wall of the pipe to ensure that it is even, and then apply the adhesive on the spliced ceramic ring to ensure that the entire pipe is pasted on the inner wall of the pipe at one time. After fixing, check whether there is any dislocation and leakage of glue on the inner wall of the pipe. After checking, place the pasted pipe in the designated position.
Grinding: After the adhesive is completely cured, grind the excess ceramic rings on both sides of the pipe to ensure that it is flat and does not damage the flange.