In the process of handling and installation, wear resistant ceramic pipes should be handled with care to avoid serious collisions. In particular, avoid direct contact with or impact on end ceramics by metal equipment.
When the wear resistant ceramic pipeline needs to be cut during installation, it can be cut with silicon carbide grinding wheel or plasma cutting machine, and gas cutting is not allowed.
When the wear resistant ceramic pipeline is installed, the pipeline and the center line of the pipeline should be aligned to ensure that the two ends are connected accurately, and the amount of misalignment of the two ends should be controlled within 1.0mm.
When the flexible pipe socket is used to connect and install the pipeline, the length of the double-end insertion in the flexible pipe sleeve is adjusted symmetrically. Since the coefficient of thermal expansion of the wear-resistant ceramic pipe is 1/2 of that of the steel pipe, the expansion gap can be reduced by 3-5mm.
When using flange connection, the flange end surface must be flush with the wear resistant ceramic pipe end surface to ensure the reliability of the connection method.