Wear-resistant ceramic glue is the main tool for fixing wear-resistant ceramic tube lining ceramics. Its use method is very different from ordinary glue. Let's talk about the specific use steps of wear-resistant ceramic glue.
Grinding and dust removal: Before pasting the wear-resistant ceramic sheet, first grind and dust off the steel parts of the porcelain pasting equipment to remove rust until the original color of the metal is exposed.
Glue.:Under normal temperature conditions, mix according to the ratio of AB glue 2:1, and stir evenly, after the preparation is completed, try to use it up within 30 minutes to prevent the glue from curing.
Apply: Apply glue to the ceramic parts that have been polished and cleaned, and be sure to apply it fully, and there should be no glue shortage. Make sure that the front and all sides of the ceramics are covered with adhesive, and the gaps between the ceramics should also be filled with adhesive.
Bonding: After the gluing is completed, use a blade to cut the adhesive tape, and use a wooden hammer to compact the ceramic sheet to let the excess glue flow out. To ensure the adhesive strength, the thickness of the glue should be kept within 0.5mm.
Patching: The gap between the ceramic sheets should be filled with wear-resistant ceramic glue, the size of the gap should be kept within 1mm, the glue should be evenly filled, and there should be no glue leakage.
Curing: After the ceramic sheet is pasted, it can be put into use after curing for 24 hours to 48 hours.
