Many customers will ask us in the inquiry communication whether the wear-resistant ceramics will fall off when they are attached to the pipes. I now make the following analysis on this problem. We have conducted a systematic collection of the problems frequently mentioned by customers. The reasons for the porcelain drop are as follows:
1. The phenomenon of ceramic drop caused by high temperature;
2. Porcelain drop caused by improper construction of ceramic sheets;
3. Porcelain will drop out when the selected process is inconsistent with the mining industry.
How to solve the problem of ceramic falling off due to high temperature?
The temperature of the ceramic patch tube is generally about 100℃, 200℃ has reached the highest value, some ceramic tubes have not reached the interim point of this temperature, the porcelain is lost, and the second is the glue problem, we will according to the operating temperature of the on-site equipment Match the glue of the corresponding temperature. When the temperature exceeds 200 degrees, the ceramic patch process may be replaced with high-temperature welding ceramic construction to solve this problem.
How to solve the problem if the ceramic sheet is not properly constructed and the ceramic is dropped?
Many manufacturers order to paste ceramics, which is prone to large-area loss of ceramics. Our company adopts the dislocation method of ceramics in construction, which can form a mechanical self-locking arch relay between the ceramics, and there will be no ceramic loss.
How to solve the problem of ceramics falling off due to the discrepancy between the construction process and the equipment site?
According to the operating conditions of the equipment: the size of the conveying material particles, the operating speed, the temperature, etc., select the appropriate ceramic technology, including ceramic patch pipes, welding ceramics, dovetail ceramics, and the ceramic thickness can be selected from 5mm-7mm-10mm-15mm-20mm, etc.