Alumina wear-resistant ceramic sheets are widely used in all walks of life because of their high hardness, super wear resistance, corrosion resistance, and impact resistance. During the construction process, ceramic cutting is essential, which is usually used What cutting, and what precautions let us understand together:
1. We use high-hardness diamond blades to cut wear-resistant ceramic sheets. There are mainly two types of cutting machines: desktop and handheld. When cutting, take good protection to avoid cutting the skin.
2. Many customers will break everything in the process of cutting ceramics. The correct cutting method: the position of the blade must be cut from the end so that the stress effect can be reduced to a minimum and it will not damage the wear resistance. The cutting of the porcelain plate is affected, especially when the high-speed rotating blade contacts the wear-resistant ceramics in the middle position, the ceramic block will be broken due to the shear stress, and attention should also be paid to the cooling of the cutting plate.
3. Laser cutting is also a method, that is characterized by narrow cutting width and can also perform curved cutting, but the only disadvantage is that it cannot cut too thick ceramic sheets.
4. In industry, wear-resistant ceramic sheet cutting tools are generally cut with diamond blades, which can achieve high precision and play a great role in precision cutting, grooving, or sawing. If the side has a taper The advanced cutting wheel can also avoid the adverse effects caused by the dulling of the abrasive,
5. When cutting wear-resistant ceramic sheets, the waterproof cover needs to be installed in sequence. During the cutting process, friction generates a lot of heat, so it is easy to generate heat, deformation, expansion, and looseness. The temperature rises quickly, which will lead to a decrease in the strength of the blade, so it is very important to pay attention to cooling the blade with water.
