Send Message
products
news
Home > news >
Company News About How To Solve The Problem Of Wear And Tear in The Ore Tank?
Events
Contacts
Contacts: Mrs. Amy
Fax: 86-731-8639-6190
Contact Now
Mail Us

How To Solve The Problem Of Wear And Tear in The Ore Tank?

2021-12-07
Latest company news about How To Solve The Problem Of Wear And Tear in The Ore Tank?

To solve the contradiction between the supply and demand of the sintered ore tank and the problem of the wear and sticky material of the liner, the wear-resistant ceramic liner was selected. The relevant production practice shows that its installation and use are successful. The wear-resistant ceramic liner was installed in the mining tank. After a year and a half of operation, the inspection was carried out, and it was found that the phenomenon of sticky materials that had plagued the production had disappeared. As long as the production is not stopped for maintenance, there is generally no hanging phenomenon. It also reduces the number of cleaning tanks every month, reduces labor intensity, and extends the use time of the wear-resistant ceramic liner. After the equipment is replaced, the liner rarely falls off, and the wear-resistant ceramic is also kept in good condition. Yes, there will be no sticky material, and it is estimated that the use of the equipment can last three to four years.

latest company news about How To Solve The Problem Of Wear And Tear in The Ore Tank?  0 latest company news about How To Solve The Problem Of Wear And Tear in The Ore Tank?  1

From the perspective of economic benefits, the use of wear-resistant ceramic liners can greatly reduce the downtime caused by equipment failure or the downtime during material cleaning and can produce a lot of sinter every year. It can reduce the labor intensity of the staff, reduce maintenance work, longer use time, reduce the frequency of component replacement, ensure the continuity of equipment work, and undoubtedly bring high economic benefits.

 

Through the above practical use, it is proved that the structure of the wear-resistant ceramic liner in the sintered ore tank is relatively simple, and there will be no sticking phenomenon, not to mention the excellent wear resistance, which can allow the equipment to be used for a long time. In addition, the lining board is directly bonded to the mining tank with an organic binder, which can avoid equipment corrosion and extend the use of the mining tank. Compared with the wear-resistant ceramic lining board and the alloy lining board, the cost performance will be higher. It is an enterprise that produces a high-quality choice.