During the long-term operation of the belt conveyor, problems such as normal or unexpected wear and aging will occur, leading to failures and directly affecting the normal operation of production.
Roller encapsulation is used to increase the friction coefficient between the conveyor belt and the surface of the roller during transmission, reduce the mutual wear between the conveyor belt and the surface of the roller, improve the traction of the operation, and extend the service life of the conveyor belt and the roller. The rubber on the surface of the drum can effectively improve the operation of the conveyor system, prevent the conveyor belt from slipping, and make the drum and the belt run synchronously, thus ensuring the belt's efficient and large-volume operation.
The drum encapsulation can also effectively prevent the sliding friction between the drum and the belt, reduce the material adhesion on the surface of the drum, and reduce the deviation and wear of the belt.
Roller ceramic encapsulation is the use of advanced thermal vulcanization technology to vulcanize wear-resistant ceramic blocks with particles on the surface in a special rubber according to a certain layout. The bottom layer of the rubber sheet is a CN layer, and then a special adhesive is used to paste it on the surface of the roller instead. Traditional rubber can enhance the friction coefficient between the belt and the drum and increase the service life of the drum. At the same time, the regularly distributed ceramic grooves are convenient for draining mud, ensuring normal operation in harsh environments, and increasing the friction coefficient of the roller surface, reducing the probability of slippage of the conveyor belt. The life of ceramic encapsulation is 5-10 times longer than that of ordinary encapsulation, which reduces the trouble of maintenance and improves the operating efficiency of the enterprise.
The thickness of the roller ceramic encapsulation is 12mm, 15mm, 16mm, 20mm, and the length is 1200mm, 1400mm, 1600mm, 1800mm, 2000mm. It can be installed on-site. The roller does not need to be disassembled, convenient and fast. It is suitable for rollers of various specifications and extreme harshness. Roller in the working environment.
